Don’t make the mistake of thinking muzzle velocity alone is what makes a good extreme long-range rifle cartridge.
It is true that the faster a bullet leaves the muzzle, the more potential it has to stay flat. But this is only part of the picture.
Some enormously heavy bullets, like .50 BMG bullets, produce very high muzzle velocities. But it’s important to remember that heavy bullets also tend to drop fast.
Also, ballistic coefficient, which affects not just bullet drop, but wind drift, also comes into play here.
Plus, it would also be conceivable to engineer a cartridge that shot fat, round bullets with very high muzzle velocities that would not shoot flat, so again, it’s not just about muzzle velocity.
Which brings up the question: What should you actually be looking for in an ELR cartridge?
There are a few things, which are typified by ELR cartridges like .408 and .375 CheyTac ammo, and this post will take a closer look at each of the most important ones.
.408 and .375 CheyTac Ammo: What Makes Them Excellent ELR Cartridges
The first thing we need to look at is how these bullets are produced. Most bullets are produced by drawing a copper jacket down from the nose of a swaged lead core. This is serviceable, but only for low-cost, high-production FMJ rounds. They can be accurate but they will never be excellent for ELR shooting.
A step up is OTM, or open-tip match, in which the jacket is drawn up from the base and pinched off at the nose. But it can still create symmetrical irregularities arising from the core or jacket.
High-end ELR cartridges, such as .408 and .375 CheyTac, are loaded with solid copper bullets that are produced using a CNC machine. As a result, the bullets used exhibit the highest tolerances, but most importantly, they are cross-sectionally consistent and have excellent radial symmetry, resulting in minimal to no bullet wobble in flight.
On top of that, these “Balanced Flight Projectiles” both produce very high muzzle velocities, and they both have very high ballistic coefficients. So it’s not just about speed when the bullet leaves the gun, it’s about keeping that speed up.
Specifically, because of their high muzzle velocities and high ballistic coefficient ratings, they are engineered to stay supersonic for longer, ideally, all the way to the target. This keeps the bullet out of what is called the transonic zone, the boundary of supersonic speed.
In the transonic zone, bullets are subject to fairly extreme forces that can severely destabilize them, resulting in bullet wobble and throwing off of their intended trajectory, even if slightly. But slightly is a big deal in ELR shooting, so keeping the bullet out of the transonic zone is a big feat.
Where to Get .408 and .375 CheyTac Ammo
If you already knew that .408 and .375 CheyTac ammo are great for ELR shooting because you have a rifle like a CheyTac M200 Intervention, and just need a place where you can get ammo, check out B&B Firearms. They are preeminent in the ELR and precision rifle shooting fields and have plenty of ammo and other extreme long-range shooting accessories you might find valuable.
For More Information About best long range rifle and custom rifle builder Please Visit: B&B Firearms LLC.