Sun. Apr 14th, 2024

Ghost Immobiliser Installation

Protect your pride & joy from thieves by adding an immobiliser ghost. Our TASSA confirmed system safeguards vehicles against hacking, key cloning and vehicle immobiliser bypass.

The system is hidden within your vehicles wiring loom which makes it completely inaccessible to anyone who sees it. It works by creating pin code push sequences that are activated by existing buttons on the steering wheel, door cards, and centre console.

No circuit cuts

A car is a prized possession that you spend years of hard work to acquire, so it’s understandable why owners want to safeguard their vehicle against theft. Traditional security systems, such as alarms or wheel locks, are easily manipulated by thieves. A ghost immobiliser is a highly-effective solution that operates silently and can’t be detected by modern thieves.

Ghost immobilisers are hidden device that connects to the CAN data network in your vehicle to shut down the engine without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle through buttons on the steering wheel, dash and door panels. This generates a unique pincode that is only available to you. The code can be altered at any time and can be up to 20 digits long, depending on what you prefer. It also comes with a secure emergency code that you can utilize if you forget your PIN.

The ghost immobiliser can be used to block relay boxes from transmitting your car key’s signal from inside your home, which could unlock the doors and then start the vehicle. It could even block high-tech methods of stealing your vehicle such as OBD port hacking. The device is tiny and weatherproof, meaning it’s hard to spot and is also difficult to alter with.

Another benefit of the ghost immobiliser is that it can be put to your vehicle without permanent marks. This makes it ideal for those who are planning to sell their vehicle in the near future. It’s also faster and easier to install than the factory-installed system.

The Autowatch Ghost is a revolutionary next-generation device that prevents vehicles that are stolen through contactless by connecting to the vehicle’s CAN data network and utilizing existing buttons to generate a unique PIN code. This is a stealthy device that can be put in without wires being cut and does not require any additional key fobs. It also connects to the original ECU cost of ghost immobiliser the vehicle, which prevents thieves from using a different key. This system has been TASSA-verified and is able to be linked to an International Security Register. Owners can rest assured, knowing that their vehicle is secured from theft.

No RF scanning

You’ll want to secure your vehicle from theft if you have spent lots of money and effort to customize it. Installing an immobiliser is one of the best ways to prevent theft. It will prevent your vehicle from starting until you enter a unique code. By using the buttons on your steering wheel as well as the dashboard, you can create a PIN up to 20 digits in length that is only accessible to you, making sure that only you can drive your vehicle. It is also possible to set up a service or valet mode that allows you to start your car for a short period without entering the PIN. This allows your technician to work on your car without your presence. This is an excellent option for people who are looking to save time and make their lives simpler.

A ghost immobiliser is a next-generation device that connects to your vehicles CAN data network, and uses the buttons on the steering wheel and dashboard to program a unique PIN code. It is designed to blend in, as it does not emit any sound or light indicator. It can be put in anywhere on your vehicle without impacting the appearance of your vehicle.

This stealthy system is TASSA approved and can cut down on your insurance costs. It comes with a tracking feature that will locate your vehicle, even if it’s been stolen. This is particularly useful if own a unique or expensive vehicle that you’ve spent a lot of time in making it your own.

The Autowatch Ghost can be used together with an iPhone app to enable you to start your vehicle remotely in the event that you forgot your PIN or not able to access the vehicle due to a reason. This feature is great if you need to take your kids to school or run errands, but don’t want to put yourself at risk by letting the safety of someone else driving your car. This feature is helpful in the event that you need to bring your car to a mechanic to be repaired or serviced.

The Ghost is unique in that it doesn’t transmit or detect radio frequencies which means it’s not detected by thieves using RF scanning and code grabbing technology. It also has the ability to safeguard your car from key cloning and ECU swapping as well as other the most common methods used to steal cars.

There is no key to cloning

Ghost immobilisers are a fantastic option for protecting high-end automobiles and are designed to prevent key copying. They stop your car from starting until an additional PIN code is entered alongside the regular key fob. This makes it difficult for thieves to steal your vehicle, and can deter them from attempting. This is a good idea in the event that your vehicle has been extensively customized or if it’s rare.

The immobilisers are connected to the vehicle’s onboard CAN data network and are completely hidden, meaning that there is no visible indication of its presence within the vehicle. It is also difficult to identify by using radio frequency scanning technology or code grabbing. This means that a burglar will need to invest much longer to take your vehicle.

A criminal will need to be aware of the pin code and the location of the ghost to get around it. The pin code is unique to you and you can change it as many times as you need to. The pin code you select is simple to remember, but mathematically impossible for anyone else to figure out. The engineer will also have provided an emergency pin code in case you forget your pin.

The Ghost CAN Bus immobiliser could be installed in a matter of minutes on your vehicle. It works with all vehicles and is completely customizable to match the appearance of your vehicle. It is also very easy to use and affordable. You can even transfer the device to another vehicle if you switch vehicles during the course of ownership, as long as the new vehicle is compatible with the.

The immobiliser on the CAN bus is compatible with many other security features. For instance, it could detect the damage to your vehicle and warn the owner. It could also shut down the engine if it detects that the vehicle has been damaged. The system can also protect your vehicle from key cloning and hacking. It can also detect any vibrations or contact with the vehicle. It will also notify the owner when the vehicle is moving.

No OBD port hacking

Ghost uses a hidden immobiliser module connected to the CAN data network of your vehicle that prevents thieves from gaining access to your vehicle to disable the alarm, turn off the key fob and generate new keys. This technology is a significant improvement over the traditional methods employed by thieves to steal vehicles in the past. The CAN data network means that the system won’t be affected by disconnecting or changing your battery.

The Autowatch Ghost, the first non-detectable CAN bus immobiliser aftermarket in the world, guards against key-cloning, hacking, and replica car theft. It does not use LED indicators or key-fobs. Instead, it relies on the buttons on your steering wheel, console and door panels.

Modern thieves employ diagnostics to detect circuit cuts on your vehicle and can bypass immobilisers that require a lot of wiring or are incorporated into the wiring. The Ghost is weatherproof and does not require any additional wiring. It cannot be detected by professional diagnosis tools. It can be even installed on vehicles equipped with anti-theft systems.

A Ghost immobiliser comes with a major benefit: your vehicle can only be started by a person who knows your PIN code and physically has access to your vehicle. This is a major advantage over traditional security systems that are easily manipulated with modification of cables or a screwdriver.

If you forget your PIN you can reset it easily by using the emergency PIN override function on a mobile device or computer. This is a great option when you want to start your car when it’s left in a garage or at valet parking.

The Autowatch ghost immobiliser fitting 2 has been approved for insurance by TASSA and is able to be installed by our authorized installers. It features a QR fingerprint system for specific parts to be identified which allows the return of stolen parts in the event of their being found, and it can be set to’service mode’ that will allow the engine to start when the vehicle is in a garage, or using a valet parking service however you have to enter your PIN code in order to leave the vehicle.

View My Stats