uPVC is a great choice for modern homes. They are durable, long-lasting and easy to maintain. They do not get rotten or rusty like aluminum or timber.
Regularly cleaning and repairs to upvc windows lubricating UPVC windows and doors is vital. This will help avoid unnecessary repair costs as well as increase energy efficiency.
1. Broken Glass
If the glass in your window repairman near me is broken it could cause a large deal of damage to your home, making it very dangerous and potentially fatal. It is important to take the time to make sure that you’re doing everything you can to ensure that your windows are in good condition.
Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. If windows with double panes are joined by internal beading, it will be difficult to remove and replace the old panes. In this case it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.
If you are going attempt to remove the window panes yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also an excellent idea to lay down a dropcloth before you start working on the glass, so that any shards will fall onto the fabric rather than on the floor where they can be trodden under and cause further damage.
It’s a great idea cover the gap with tape after the glass is removed. This will prevent water and drafts from entering your home until a professional arrives to fix the window. This will also provide an obstacle to stop criminals from getting into your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window as this will offer the best of both worlds.
2. Sagging
Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. Over time, they can develop a variety of issues that include sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from worsening.
To repair a window that is sagging, you can try repositioning the hinges. You’ll first need to open the windows to access the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you’re happy with the fit, tighten the screws to ensure that they remain in the right place.
If you are unable to move the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause them to lose tightness. It is essential to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.
uPVC handles could also become loose. Most often, this is caused by screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. It’s relatively easy to fix a loose uPVC hand. First, you’ll need to shut the window and perform an experiment fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn’t, you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into its original position.
3. Water Leaks
It is crucial to take action if awake each day to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or is missing.
This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue is, the old caulking might need to be removed. When it is time to uPVC repair, you must be careful not to over-caulk. This will only make your window harder to clean and decrease its energy efficiency.
It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious situations, you might have to consider replacing the window.
Mold spots and rotten sills are other signs of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the home.
If the leakage occurs between the double-glazed glass, it is more likely the issue is more with the seal than the frame. Again this can easily be repaired by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
Hinges may be to blame when your uPVC window is difficult to open or if it blows open with a breeze. They can be replaced by any competent DIYer and can be done within a few minutes.
Nearly every home in the UK will have either top hung or side-hung uPVC windows that are hinged and like any mechanical part they will wear out over time. Changing a window hinge is essentially a simple process, but it’s easier with someone else to assist in holding the frame in place.
It is also worth checking that the upvc windows repairs near me hinges are opening and closed in the correct direction. You can do this by looking for the arrows on each hinge. This indicates which way the window should open.
The problem with the hinges on windows can be caused by incorrectly opening the window in a particular manner or because of inadequate installation at the factory. This can often be resolved by sending us a photo on our website. We will be pleased to offer you advice.
It is also essential to lubricate the hinges regularly. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also stop corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.
5. Draughts
Draughts in windows made of upvc can be caused by a few various factors. First, the hinges due to wear and tear could become misaligned. This can cause an opening to appear where the sash meets the frame. These can be easily repaired by giving them thorough clean, however in the event that they are beyond repair it could be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge side of the window, may be misaligned. Again, it may be possible to give them a good clean, but in some instances it could be necessary to have them replaced.
These seals are susceptible to wear and tear or get damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Another option is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and will reduce the possibility of draughts.
The last way to reduce draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. They can keep your home warm by blocking out cold air.
With a little regular maintenance and repairs your windows made of upvc will provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows eventually wear out and it may be more cost-effective to simply replace them than to repair them. So, if you’re having issues with your upvc windows, it is best to seek professional assistance immediately.